Water Leak Detection and Repair in Boerne TX

Gottfried Plumbing LLC provides water leak detection and repair in Boerne, TX, Kendall County, and the surrounding Hill Country. Our team locates hidden pipe, fixture, and slab leaks using acoustic listening devices, infrared cameras, pipe locators, and pressure gauges. Master Plumber Mark Gottfried, Texas License #43658, oversees all work. We are open 24 hours with same-day scheduling for both routine leak calls and active water damage emergencies.

Call (830) 331-2055 for water leak detection in Boerne, TX.

Why Boerne Homeowners Call Gottfried Plumbing for Leak Detection

Hidden leaks cause damage long before you see stains on the wall or puddles on the floor. Our licensed team locates the source of the issue with minimal disruption to your home, so the repair is targeted and the wall stays mostly intact.

Master Plumber Mark Gottfried oversees every leak call, Texas License #43658
Non-invasive detection with acoustic listening devices and infrared cameras
Written quote before any repair work begins
Boerne Star 2024 Best Plumber winner
5 stars from over 150 verified Google reviews
Family-owned Boerne business since 2020
Same-day scheduling and 24-hour availability for active leaks

Call (830) 331-2055 to schedule your leak detection service.

How Boerne Water and Ground Conditions Cause Plumbing Leaks

Boerne homes face conditions that wear down pipes faster than in many other Texas cities. Water from the Trinity Aquifer has a mineral hardness of 15 to 20 grains per gallon. That constant mineral load builds scale inside supply lines, wears down fitting seals, and weakens copper joints over time.

The ground contributes too. Boerne’s shallow limestone soil shifts seasonally between wet and dry cycles, putting pressure on underground water lines. Hill Country freeze events during winter cold snaps cause exposed pipes to crack at their weakest points. Add the natural aging of pipe materials in older homes near downtown Boerne, and the result is a wide range of leak types across the area.

Our team identifies the root cause of each leak, not just the visible symptom. A pinhole leak in copper often indicates internal corrosion elsewhere along the line. A joint failure at a fitting may signal a broader issue with the pipe. Getting the diagnosis right the first time prevents a repeat leak in the same area within months.

Where Plumbing Leaks Happen in Boerne Homes

Leaks appear in several parts of a residential plumbing system. Knowing the common locations helps with early detection.

Behind walls and under floors: Supply lines running through wall cavities and under flooring often develop pinhole leaks or joint separations that stay hidden until visible damage appears
Under the concrete slab: Slab leaks occur when pressurized supply lines beneath the foundation crack or corrode, causing warm spots on floors and cracks in walls above the line
In attic spaces: Water lines running through attic areas can crack during Hill Country freeze events, especially on outer walls and near vents
At fixture connections: Slow leaks develop at valve seats, supply line connections, and shutoff valves behind sinks, toilets, and appliances
Along outdoor supply lines: The service line from the water meter to the home often leaks underground with only wet spots or green grass patches as the visible sign
At water heater connections: Slow drips at supply and outlet fittings can go unnoticed for months, causing corrosion damage to the tank exterior and utility room floor

Our team inspects all of these locations during a leak call, not just the area of visible damage.

Signs of a Water Leak in Your Home

Recognizing the warning signs early helps limit water damage and repair costs. Watch for the following signs:

Unusual increase in your water bill with no change in household usage
Water meter dial that moves even when no water is running in the home
Discoloration or water stains on ceilings, walls, or baseboards
Warping or buckling floors in specific spots that seem otherwise unexplained
Damp carpet or wet spots on flooring without a clear source
Mildew or mold growth on walls, floors, or inside cabinets
Warm spots on tile or concrete floors which may point to a hot water slab leak
Cold or unusually damp areas along the foundation slab
Low water pressure across the home when the meter shows water flow
Sound of running water when no fixtures are in use
Unusually green grass patches in the yard over the buried water line path

Any one of these signs warrants a professional inspection. Multiple signs at once often mean the leak has been active for some time.

Call (830) 331-2055 for a leak inspection.

What to Do When You Suspect a Water Leak

Fast action limits water damage while you wait for a licensed plumber. Take these steps as soon as you suspect a leak.

Shut off the home’s main water supply if the leak is severe or active. The main shutoff is usually near the water meter or where the supply line enters the home
Turn off water at a local shutoff valve if the leak is limited to a single fixture or appliance
Document the damage with photos before mopping or drying. Insurance claims often require visible evidence of the condition
Move furniture, electronics, and valuables away from the affected area
Turn off electricity at the breaker if water is near outlets, wiring, or electrical panels
Avoid running dishwashers, washing machines, and other water-using appliances until the leak is located

Call (830) 331-2055 and our team will dispatch a plumber the same day.

How We Locate the Leak

Finding the source of a leak requires the right tools and a clear process. Guessing wastes time and often leads to more wall damage than the leak itself. Our team follows the same detection sequence on every leak call.

1. Locate the Source

We start with a system-wide check to identify which section of the plumbing is leaking. This often includes shutting off fixtures one by one to isolate the leaking segment, then confirming the general location with meter readings.

2. Pinpoint the Exact Location

Once we know which line or fixture is leaking, we use non-invasive detection tools to pinpoint the exact spot:

Acoustic listening devices detect the sound of water escaping a pressurized pipe, even through concrete or drywall
Infrared cameras identify temperature differences that reveal water behind walls or under floors
Pipe locators map the buried supply line path to guide outdoor leak detection
Pressure gauges confirm system pressure and identify pressure loss patterns from the leak

3. Plan the Repair

With the exact location confirmed, we outline the repair options and provide a written quote. You know the price and scope before any wall gets opened or any pipe gets touched.

Leak Repair Options Available

Not every leak requires the same repair method. The right approach depends on the location, the pipe material, and the extent of the damage.

Spot repair: A single-point failure in an otherwise sound pipe is often handled by cutting out the damaged section and installing new fittings. This is the fastest and least disruptive option
Section replacement: When corrosion or wear extends across a longer stretch of pipe, replacing that whole section is more cost-effective than repeating spot repairs
Whole-home re-pipe: Homes with multiple leaks over a short period or with pipe materials past their service life often need a full whole-home re-pipe. This addresses the root problem rather than treating symptoms

Our team presents the options that fit your specific situation, with the honest tradeoffs of each, before you decide.

Choose the Right Leak Repair Method for Your Situation

The correct repair method depends on the leak’s location, the pipe material, and the extent of the damage. Non-invasive detection during the initial inspection helps us determine which method fits before any excavation or wall opening begins.

Targeted spot repair: Works best when the leak is accessible and confined to a single point on an otherwise sound pipe. This is the fastest and least disruptive method.
Section replacement: The right call when the pipe wall itself is corroded or when multiple joints are failing along one section. Longer-lasting than repeated spot repairs.
Fixture-level repair: Fits leaks isolated to a valve, supply line, or connection at a specific fixture. Often completed in a single visit without opening walls.
Non-invasive access repair: When acoustic and infrared detection confirms the exact leak location, we open the smallest access point needed to reach and repair the pipe.

The final method is chosen based on what our detection tools reveal, not on a general rule. Our team explains the reason behind each recommendation before any work starts.

Related Services for Boerne Homes

Some leak problems fall into specialized service categories that have their own dedicated pages.

Slab leaks: A leak beneath the foundation slab requires specialized detection and repair. Our slab leak detection and repair service uses non-invasive methods to locate the leak before any concrete cutting starts
Main water line leaks: Leaks in the main supply line from the meter to the home require different diagnostic tools and repair methods. Our main water line service covers repairs and replacements for that specific line
Water line repair for interior supply lines: Leaks in the interior water lines running through walls, floors, or ceilings fall under our water line repair service
Sewer line leaks: Leaks from the sewer line rather than the water supply require different diagnostic tools. Our sewer line repair, replacement, and installation service handles that side of the plumbing

If you are not sure which service fits your situation, call us, and we will identify the type of leak during the first visit.

Commercial Leak Detection

Commercial properties in Boerne face the same types of leaks as homes, plus a few unique challenges. Multi-tenant buildings, restaurants, and healthcare facilities depend on plumbing systems running under higher daily demand. A hidden leak can affect operations, sanitation, and health code compliance.

Our commercial plumbers handle leak detection and repair with the same non-invasive tools used on residential jobs, scaled to the property’s size and complexity.

Where We Handle Leak Detection Calls

Our leak detection team dispatches to properties across:

Boerne, TX (78006 and 78015)
Fair Oaks Ranch
Cordillera Ranch
Herff Ranch
Comfort
Bulverde
Spring Branch
Waring
Welfare
Sisterdale
Greater Kendall County and the surrounding Texas Hill Country

Call (830) 331-2055 to confirm service at your address.

Contact Us for Reliable Leak Repair Solutions

Gottfried Plumbing has been finding and fixing leaks in Boerne homes since 2020. Mark started as an apprentice and journeyman plumber across Kendall County and the surrounding Hill Country before securing his Master Plumber license and opening his own company. Every leak call now runs on the same commitment to hard work, fair pricing, and considerate service that built the business.

Non-invasive detection tools protect your walls and floors. Written pricing protects your budget. Master Plumber oversight protects the quality of every repair. We use quality materials, work with integrity from start to finish, and treat your property with the care it deserves.

Call (830) 331-2055 to book your leak detection service in Boerne, TX.

Gottfried Plumbing LLC

39360-B I-10, Boerne, TX 78006, United States

(830) 331-2055

Operational Hours:

Monday to Sunday: 24 hours

Find us on Facebook:

Location Map

Driving Directions